We have a large amount of Samsung, Murata, TDK, and KEMET in stock. The specific information of some recently shipped models is as follows:
Part Number : CL31B225KCHSNNE
Manufacturer : Samsung Electro-Mechanics
Capacitance : 2.2 µF
Tolerance : ±10%
Voltage - Rated : 100V
Temperature Coefficient : X7R
Operating Temperature : -55°C ~ 125°C
Features :
① A Normal MLCC temporarily charges and reduces noise in electronic circuits, and is the most broadly available chip-type capacitor.
②The product line allows realization of various sizes and a wide range of capacitance.
③ It also has the structural capacity to mount chips on a PCB at a high speed.
Applications :
Smart Phone, PC, HDD/SSD Board, Tablet, Display, Game Machine, DC-DC Converter
Part Number : CL31A476MQHNNNE
Manufacturer : Samsung Electro-Mechanics
Capacitance : 47 µF
Tolerance : ±20%
Voltage - Rated : 6.3V
Temperature Coefficient : X5R
Operating Temperature : -55°C ~ 85°C
Applications : General Purpose
Part Number : GRM033C71C104KE14D
Manufacturer : Murata Electronics
Capacitance : 0.1 µF
Tolerance : ±10%
Voltage - Rated : 16V
Temperature Coefficient : X7S
Operating Temperature : -55°C ~ 125°C
Limitation of Applications :
Please contact the manufacturer before using the product for the applications listed below which require especially high reliability for the prevention of defects which might directly cause damage to the third party's life, body or property.
①Aircraft equipment
②Aerospace equipment
③Undersea equipment
④Power plant control equipment
⑤Medical equipment
⑥Transportation equipment(vehicles,trains,ships,etc.)
⑦Traffic signal equipment
⑧Disaster prevention / crime prevention equipment
⑨Data-processing equipment
⑩Application of similar complexity and/or reliability requirements to the applications listed in the above
Storage and Operation condition
1. The performance of chip monolithic ceramic capacitors may be affected by the storage conditions.
( 1 ) Store the capacitors in the following conditions:
Room Temperature of +5℃ to +40℃ and a Relative Humidity of 20% to 70%.
① Sunlight, dust, rapid temperature changes, corrosive gas atmosphere, or high temperature and humidity conditions during storage may affect solderability and packaging performance.
Therefore, please maintain the storage temperature and humidity. Use the product within six months, as prolonged storage may cause oxidation of the terminations (outer electrodes).
② Please confirm solderability before using after six months.
Store the capacitors without opening the original bag.
Even if the storage period is short, do not exceed the specified atmospheric conditions.
( 2 ) Corrosive gas can react with the termination (external) electrodes or lead wires of capacitors, and result in poor solderability. Do not store the capacitors in an atmosphere consisting of corrosive gas (e.g.,hydrogen sulfide, sulfur dioxide, chlorine, ammonia gas etc.).
( 3 ) Due to moisture condensation caused by rapid humidity changes, or the photochemical change caused by direct sunlight on the terminal electrodes and/or the resin/epoxy coatings, the solderability and electrical performance may deteriorate. Do not store capacitors under direct sunlight or in high huimidity conditions
Part Number : C3216X5R1V226M160AC
Manufacturer : TDK Corporation
Capacitance : 22 µF
Tolerance : ±20%
Voltage - Rated : 35V
Temperature Coefficient : X5R
Operating Temperature : -55°C ~ 85°C
Features :
• Superior mechanical strength and high reliability due to the monolithic structure
• Outstanding frequency characteristics such as low ESR and low ESL by the simple structure
• Low self-heating value and high resistance to ripple on account of the low ESR
• No polarity
Applications :
• General electronic equipment
• Mobile devices
• Servers, PCs, tablets
• Power supply circuit
Part Number : C0402C104K4RAC7867
Manufacturer ：KEMET
Cpacitance : 0.1 µF
Tolerance : ±10%
Voltage - Rated : 16V
Temperature Coefficient : X7R
Operating Temperature : -55°C ~ 125°C
Benefits :
• −55°C to +125°C operating temperature range
• Lead (Pb)-free, RoHS, and REACH Compliant
• Temperature stable dielectric
• EIA 0402, 0603, 0805, 1206, 1210, 1808, 1812, 1825, 2220, and 2225 case sizes
• DC voltage ratings of 6.3 V, 10 V, 16 V, 25 V, 35 V, 50 V,100 V, 200 V, and 250 V
• Capacitance offerings ranging from 10 pF to 47 μF
• Available capacitance tolerances of ±5%, ±10%, and ±20%
• Non-polar device, minimizing installation concerns
• 100% pure matte tin-plated termination finish allowing for excellent
solderability
• SnPb termination finish option available upon request (5% Pb minimum)
Applications :
Typical applications include decoupling, bypass, filtering and transient voltage suppression.
KEMET’s X7R dielectric features a 125°C maximum operating temperature and is considered temperature stable. The Electronics Components, Assemblies and Materials Association (EIA) characterizes X7R dielectric as a Class II material. Components of this classification are fixed, ceramic dielectric capacitors suited for bypass and decoupling applications or for frequency discriminating circuits where Q and stability of capacitance characteristics are not critical. X7R exhibits a predictable change in capacitance with respect to time and voltage, boasting a minimal change in capacitance with reference to ambient temperature. Capacitance change is limited to ±15% from −55°C to +125°C.
Storage & Handling :
Ceramic chip capacitors should be stored in normal working environments. While the chips themselves are quite robust in other environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term storage. In addition, packaging materials will be degraded by high temperature – reels may soften or warp and tape peel force may increase. KEMET recommends that maximum storage temperature not exceed 40°C and maximum storage humidity not exceed 70% relative humidity. Temperature fluctuations should be minimized to avoid condensation on the parts and atmospheres should be free of chlorine and sulfur bearing compounds. For optimized solderability chip stock should be used promptly, preferably within 1.5 years of receipt.
Our service：
--100% New and Original Components
--365 Days Guarantee for all ordered parts
--Support sample order
--Free shipping cost for first order
Looking forward to cooperate with you.Email : [email protected]
Upload BOM
